Neon Sign Instructions Designer Software

      Click here for Training Videos for Sign Instructions Designer 2.0

The Sign Instructions Designer software will allow you to easily put together wiring instructions for your Neon or LED sign.

This software will also allow you to open and edit the Technical Data Sheets, customizing them for your specific needs, then print them out or export them for other uses.

The main purpose of this software was to easily allow people to comply with the new UL standard of supplying a wiring diagram. The Diagram must be left with the customer so that the Electrical Inspector can see the detail of how the sign is wired.

Here is the new UL 48 code change:

INSTRUCTIONS
41 Details

41.1 Signs shipped in sections

41.1.1 Instructions for the installation of a section sign shall be provided, attached to each subassembly of the section sign (where readily visible during installation) or shipped with the section sign (for example, as a stuffer sheet), and shall contain the information specified below. These instructions are not prohibited from including details of operator or user servicing features.

a) A drawing(s) depicting the arrangement of the subassemblies,
b) Instructions for the physical installation of subassemblies and the mechanical connections between subassemblies,
c) A drawing depicting the wiring arrangement of the subassemblies and components necessary to complete the electrical connection between subassemblies.
d) Any conditions of use required for the subassembies,
e) Any conditions of use for any components required to complete the wiring,
f) Instruction for the field wiring between the subassemblies and any components, and connection to the source of supply.
(revised 41.1.1 effective October 15, 2005)

41.1.2 Deleted effective September 15, 2005

41.1.3 Deleted effective September 15, 2005



Disclaimer and Proper Use

High voltage, secondary wiring installations, should only be attempted by experienced electrical professionals. This manual is not a how-to guide covering all aspects of high-voltage neon installations. This manual is a visual reference guide used to help avoid common mistakes in secondary wiring. It can also be used as a complement to other materials in learning the basics about definitions, parts, and different types of installations found within the sign industry. This manual should not be relied upon as the sole source of information for high-voltage installations. At the time of printing, we believe the information found within is correct; however, codes and legislation change and that may outdate sections of this visual guide. The publishers or sponsors of this visual guide cannot be held liable for any damages or injury resulting from interpretations, or use of this manual as a basis for electrical installations. Installers of any high-voltage wiring should always conform to the relevant or applicable electrical practices, sign codes, electrical codes or other governing authorities.

 

Guide to Install Neon Signs | SiteMap | Directory | Neon Sign Glossary | Order Neon Signs
About: Neon Installation Guide | Neon Technical Data Sheets | Neon Sign Instructions Designer Software
School Signs | 3PRIME

 

©2006-2013 NeonInstallationGuide.com